The NEW IRM is a single station fully automated de-paneling system, with post route PCB handling.

The IRM uses a gripper to firmly hold all the PCB during routing, there by delivering extremely high performance in terms of accurate fast dust free routing. After routing, the PCBs are placed onto a conveyor ready for down line processing.

Options include auto tool change, pre route flip stations and a comprehensive range of tool management.

The IDM is a single station sawing machine, designed to deliver unrivalled stress free performance in speed and accuracy.

Precision is “key” to the success of the IDM. A precision rotary table fitted with a precision gripper fixture, post route board handling and pre route auto conveyor width adjustment plus an array of software tools to enhance the performance of routing cycle makes the IDM ideal for panels such as memory modules, where fully automated high through put is a must.

Various options are available.

The PRM is a single station inline routing machine, designed to pre-route tabs before the panel is conveyed to final routing, thus increasing the output of any final routing system.

Also ideal for panels that stay that can still be transported on the edge belt after routing.

Options include auto tool change, pre route flip stations and a comprehensive range of tool management.

The GIR is a single station inline routing system, complete with board handling and “carrier” loading stations.

The GIR uses a gripper to firmly hold each PCB during routing, there by delivering extremely high performance in terms of accurate and fast routing. After routing, the PCBs can be flipped or rotated before being placed into a "Carrier” and conveyed down line to the next station.

Options include auto tool change, pre route flip stations and an array of software tools to enhance the performance of routing.