All Products

APIL

Auto Printing Label, Inspection And Labelling

• APIL: Auto Labelling PCBA Inspect for Print Defects Including OCR Decode Inspect for Placement Accuracy Two Printers to Support 2 Labels per Product Inline System Using SMEMA On-Demand Print and Pre-Printed Label Support SECS/GEM Interface to Testers SEMI S2, S8 & F47 Compliance ESD Compliance User Friendly Software
• 320 x 250: L x W
• Scara Robot: : Dual tip : Quick change label heads : Label reject station for placing reject labels
• 3 stage conveyor: : Inline system : SMEMA communication to up / down stream systems : Panel barcode scanner for traceability : Process conveyor clamping to align PCBA panel
• Cycle Time: : 2.8 sec / label with 12up panel
• +/- 0.7 mm: : Cpk > 1.67
• 2 Printers: : ZT610 printers. : BarTender for Label design and printing : Support on demand and pre-printed labels : Label shuttle axis for label transfer from Printer to Scara Robot
• Conversion Time: : 15 min. : Conversion required when form factor
• 3 vision system: : PC based vision system : Label Inspection: Keep Out Zone check, OCR decode, Barcode decode, and Print quality grading : Post Labelling Inspection: Check for placement accuracy. Barcode decoding for traceability
• Panel ID: : Panel is traced using Panel ID 2D barcode
• SEMI: : SECS/GEM compliance : SEMI S2/S8 compliance
• ESD: : SEM F47 compliance : ESD compliance
• Machine Size (L x W x H): : 1553 x 1653 x 1802
• Power: : 1P + N + E, 230VAC, Full Load Current: 6A : CDA: 6bar

MORE DETAILS

GBR GEN 3

The Most Versatile Fixtureless PCB Routing Solution

• GBR GEN 3: Fixtureless Bottom Routing High Accuracy & Quality Cuts High-Speed Routing & Throughput Auto Tool Change & Diameter Validation Programmable Servo Gripper With Auto Finger Exchange Auto Infeed Width Adjustment In-Line Automation Ready Powerful Dual Vacuum System High-Resolution Camera Flexible Outfeed Options
• Non-routing Speed: 1000 mm/sec
• Routing Speed: 100 mm/sec (dependent on material, cutting quality, and tool diameter)
• Repeatability: Up to ±0.1 mm typical; ±0.05 mm achievable under optimized conditions
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 mm x W480 mm (Min. width = 70 mm)
• Panel Thickness: 0.8 mm – 6 mm
• Panel Max. Weight: 5 Kg
• Component Height: Top: Max. 70 mm Bottom: Max. 17 mm (subject to panel design; confirm with Getech) Outside 25 mm routing radius: Max. 30 mm

MORE DETAILS

RBM

Inline Router with Board Handling

• High Speed Routing up to 100mm/sec :
• Position Speed up to 1400mm/sec :
• Two Independent Workstations :
• PnP arm to transfer de-panelized board to further automated EOL Operations:

MORE DETAILS

GBR1200

Total Solution for PCB routing Operations

• GBR1200 : Fixtureless Bottom Router High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Programmable Servo Gripper with Auto Finger Exchange Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Post Cutting Dimension Check Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed : 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness: 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 2.5kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

MORE DETAILS

Total Solution for High UPH Routing Operations

GBR1200-HT

• GBR1200-HT machine: Post Cutting Dimension Check High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Multi Gripper for Mass Handling and High Throughout Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Bottom Router with Top Multi PCB Gripper Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed: 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning : Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness : 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 1kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

MORE DETAILS

Non-contact Induction Soldering System

MORE DETAILS