PCBA Production

APIL

• APIL: Auto Labelling PCBA Inspect for Print Defects Including OCR Decode Inspect for Placement Accuracy Two Printers to Support 2 Labels per Product Inline System Using SMEMA On-Demand Print and Pre-Printed Label Support SECS/GEM Interface to Testers SEMI S2, S8 & F47 Compliance ESD Compliance User Friendly Software
• 320 x 250: L x W
• Scara Robot: : Dual tip : Quick change label heads : Label reject station for placing reject labels
• 3 stage conveyor: : Inline system : SMEMA communication to up / down stream systems : Panel barcode scanner for traceability : Process conveyor clamping to align PCBA panel
• Cycle Time: : 2.8 sec / label with 12up panel
• +/- 0.7 mm: : Cpk > 1.67
• 2 Printers: : ZT610 printers. : BarTender for Label design and printing : Support on demand and pre-printed labels : Label shuttle axis for label transfer from Printer to Scara Robot
• Conversion Time: : 15 min. : Conversion required when form factor
• 3 vision system: : PC based vision system : Label Inspection: Keep Out Zone check, OCR decode, Barcode decode, and Print quality grading : Post Labelling Inspection: Check for placement accuracy. Barcode decoding for traceability
• Panel ID: : Panel is traced using Panel ID 2D barcode
• SEMI: : SECS/GEM compliance : SEMI S2/S8 compliance
• ESD: : SEM F47 compliance : ESD compliance
• Machine Size (L x W x H): : 1553 x 1653 x 1802
• Power: : 1P + N + E, 230VAC, Full Load Current: 6A : CDA: 6bar

GBR GEN 3

• GBR GEN 3: Fixtureless Bottom Routing High Accuracy & Quality Cuts High-Speed Routing & Throughput Auto Tool Change & Diameter Validation Programmable Servo Gripper With Auto Finger Exchange Auto Infeed Width Adjustment In-Line Automation Ready Powerful Dual Vacuum System High-Resolution Camera Flexible Outfeed Options
• Non-routing Speed: 1000 mm/sec
• Routing Speed: 100 mm/sec (dependent on material, cutting quality, and tool diameter)
• Repeatability: Up to ±0.1 mm typical; ±0.05 mm achievable under optimized conditions
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 mm x W480 mm (Min. width = 70 mm)
• Panel Thickness: 0.8 mm – 6 mm
• Panel Max. Weight: 5 Kg
• Component Height: Top: Max. 70 mm Bottom: Max. 17 mm (subject to panel design; confirm with Getech) Outside 25 mm routing radius: Max. 30 mm

RBM

• High Speed Routing up to 100mm/sec :
• Position Speed up to 1000mm/sec :
• Two Independent Workstations :
• PnP arm to transfer de-panelized board to further automated EOL Operations:

GBR1200

• GBR1200 : Fixtureless Bottom Router High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Programmable Servo Gripper with Auto Finger Exchange Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Post Cutting Dimension Check Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed : 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness: 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 2.5kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

Total Solution for High UPH Routing Operations

• GBR1200-HT machine: Post Cutting Dimension Check High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Multi Gripper for Mass Handling and High Throughout Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Bottom Router with Top Multi PCB Gripper Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed: 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning : Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness : 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 1kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

GAR1200

• Size: 350 × 310 mm (Dual Table), 480 × 310 mm (Single Large Table)
• Thickness: 0.5mm – 8.0mm
• Component Height: Top max. 12 mm (option: max. 17 mm) Bottom max. 25 mm (option: max. 42 mm)
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y&W axes)
• Accuracy: : ±0.1 mm
• Cutting Speed: 100mm/sec max
• Size: 1.75M x 1.45M x 1.70M
• Additional : Also available as a single worktable for larger PCBS.

MPR

• Size: 450 × 400 mm (Vacuum P&P) 315 × 230 mm (Multi-gripper P&P)
• Thickness: 0.5mm – 8.0mm
• Component height: Top max. 17 mm, Bottom max. 40 mm
• Non-routing speed: 1500mm/sec
• Accuracy or Repeatability: ±0.1 mm
• Cutting speed: 100mm/sec max
• Size: (W x D x H) = 1740 mm x 2100 mm x 1750 mm

GBR MAX

• Non-Routing Speed: 800 mm/sec
• Routing Speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Configuration: 9 axis
• Manipulator Motors: AC brushless servo motors
• Manipulator Repeatability: ±0.02 mm
• Resolution: ±0.01 mm
• Design: Fixtureless - Bottom Routing
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Width: Min. 70mm, Max. 400mm,
• Panel Length: Max. 1200mm
• Panel Thickness: 0.8 mm – 5.0 mm
• PCB Max. weight: 6.0 Kg
• Component Height: Top max. 70 mm, Bottom max. 17 mm, For bottom comp. height up to 30 mm, ask Getech sales

IRLD

• Configuration: 4 axes
• Manipulator Motors: AC brushless servo motors
• Manipulator Repeatability: ±0.02 mm
• Resolution: ±0.01 mm
• Design: Dual workstation with dedicated fixtures on a rotary turntable
• Panel Positioning: Locating pins with top clamp
• Panel Size: 300mm X 300mm
• Panel Thickness: 0.6mm – 1.0mm
• Component Height: Top max. 5mm, Bottom max. 5mm
• Type: 40 W Nanosecond Green Laser
• Cooling: Closed-loop water chiller
• Cutting Window: Up to 100 mm × 100 mm

SPR1200

• Assets: High Speed Routing & Throughput, Dual Tables, In-Line Automation Ready, High Accuracy Quality Cut
• Assets: High Resolution Camera, Automatic Tool Change, Safety Protection, Powerful Vacuum System, User-Friendly Software
• Space saving length: 1137 mm
• Accuracy or Repeatability: ±0.1 mm

IDM

• Size: 300mm x 200mm
• Thickness: 0.5mm – 2.0mm
• Component Height: 12mm [Subject to review by Getech Engineering.]
• Non-dicing speed: 1000mm/sec
• Accuracy: +/- 0.1mm
• Cutting Speed: 200mm/sec max
• Saw thickness: 0.3mm – 1.0mm
• Size: 1.25M x 1.5M x 1.75M

GSNL

• Design: SCARA (4 axis robot)
• Repeatability: +/- 0.01 mm
• Reach: 650 Horizontal, 180 mm Vertical
• End Effector: Dual gripper type pick up heads, Product-specific
• Transport Positions: Output placing, Tray loading and unloading
• Axis & Drive Method: Axis X – Linear module driven by a servo motor Axis Y – Belt-drive transportation by induction motor
• Tray Positioning: Tray Lifter with guides
• Machine Size (WxDxH): 1342 mm x 1932 mm x 2230 mm
• Power Supply: Options available

GLMS2000

• Size: 1200mm x 400mm
• Thickness: 0.8mm – 4.0mm
• Accuracy: +/- 0.1mm
• Laser System: 30W CO2 (Class 4)
• Size: 1.8M x 1.8M x 1.87M
• Additional: Also able to handle multiple smaller parts on single PCB

GLMS

• Size (double-side marking): 450mm x 400mm
• Size (single-side marking): 550mm x 570mm
• Thickness: 0.8mm – 4.0mm
• Accuracy: +/- 0.1mm
• Laser system: 30W CO2 (Class 4)
• Dimensions: 0.82M x 1.8M x 1.55M
• Additional: Also able to handle multiple smaller parts on single PCB

GLRH

• Size: 300mm x 300mm
• Component Height: Up to 50mm
• Scan Speed: Up to 12M/Sec
• Accuracy: +/- 0.1mm
• Laser system: 25W Fiber Laser (Class 4)
• Dimensions: 1.0M x 1.275M x 1.7M

GSR1280XL

• Size: Size: 610 mm x 610 mm, 610 × 510 mm (with Auto-Tool Change)
• Thickness: 0.4 mm – 8.0 mm
• Component Height: Top max. 70 mm (max. 17 mm within 30 mm radial distance) Bottom max. 70 mm
• Non-routing speed: 1000 mm/sec max (X-axis), 800 mm/sec max (Y&W axes)
• Accuracy or Repeatability: ±0.1 mm straight lines, curves, and interpolated profiles
• Cutting speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Dimensions: 1900 W (2075 W with side cover) x 1745 D x 1700 H mm

APIL

• APIL: Auto Labelling PCBA Inspect for Print Defects Including OCR Decode Inspect for Placement Accuracy Two Printers to Support 2 Labels per Product Inline System Using SMEMA On-Demand Print and Pre-Printed Label Support SECS/GEM Interface to Testers SEMI S2, S8 & F47 Compliance ESD Compliance User Friendly Software
• 320 x 250: L x W
• Scara Robot: : Dual tip : Quick change label heads : Label reject station for placing reject labels
• 3 stage conveyor: : Inline system : SMEMA communication to up / down stream systems : Panel barcode scanner for traceability : Process conveyor clamping to align PCBA panel
• Cycle Time: : 2.8 sec / label with 12up panel
• +/- 0.7 mm: : Cpk > 1.67
• 2 Printers: : ZT610 printers. : BarTender for Label design and printing : Support on demand and pre-printed labels : Label shuttle axis for label transfer from Printer to Scara Robot
• Conversion Time: : 15 min. : Conversion required when form factor
• 3 vision system: : PC based vision system : Label Inspection: Keep Out Zone check, OCR decode, Barcode decode, and Print quality grading : Post Labelling Inspection: Check for placement accuracy. Barcode decoding for traceability
• Panel ID: : Panel is traced using Panel ID 2D barcode
• SEMI: : SECS/GEM compliance : SEMI S2/S8 compliance
• ESD: : SEM F47 compliance : ESD compliance
• Machine Size (L x W x H): : 1553 x 1653 x 1802
• Power: : 1P + N + E, 230VAC, Full Load Current: 6A : CDA: 6bar

GBR GEN 3

• GBR GEN 3: Fixtureless Bottom Routing High Accuracy & Quality Cuts High-Speed Routing & Throughput Auto Tool Change & Diameter Validation Programmable Servo Gripper With Auto Finger Exchange Auto Infeed Width Adjustment In-Line Automation Ready Powerful Dual Vacuum System High-Resolution Camera Flexible Outfeed Options
• Non-routing Speed: 1000 mm/sec
• Routing Speed: 100 mm/sec (dependent on material, cutting quality, and tool diameter)
• Repeatability: Up to ±0.1 mm typical; ±0.05 mm achievable under optimized conditions
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 mm x W480 mm (Min. width = 70 mm)
• Panel Thickness: 0.8 mm – 6 mm
• Panel Max. Weight: 5 Kg
• Component Height: Top: Max. 70 mm Bottom: Max. 17 mm (subject to panel design; confirm with Getech) Outside 25 mm routing radius: Max. 30 mm

RBM

• High Speed Routing up to 100mm/sec :
• Position Speed up to 1000mm/sec :
• Two Independent Workstations :
• PnP arm to transfer de-panelized board to further automated EOL Operations:

GBR1200

• GBR1200 : Fixtureless Bottom Router High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Programmable Servo Gripper with Auto Finger Exchange Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Post Cutting Dimension Check Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed : 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness: 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 2.5kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

Total Solution for High UPH Routing Operations

• GBR1200-HT machine: Post Cutting Dimension Check High Accuracy, High Quality Cuts In-Line Solution L to R or R to L flow Multi Gripper for Mass Handling and High Throughout Auto Tool Change and Diameter Validation Auto Product Change, Auto Width Adjust Powerful Dust Extraction System Post Cutting Ionized Secondary Cleaning Station Bottom Router with Top Multi PCB Gripper Tray, Pallet and Conveyor Offload Options Flexible or High Volume Configuration
• Non-Routing Speed: 1000 mm/sec
• Routing Speed : 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Repeatability: ±0.05 mm straight lines, curves, and interpolated profiles
• Design: Fixtureless - Bottom Routing, In-line
• Panel Positioning : Conveyor rail clamping (Top and Side) and Board gripping
• Panel Size: L600 x W400 single station conveyor: L400 x W400 w 2 stage conveyor
• Panel Thickness : 0.8mm to 6mm
• Panel Max Weight: 5kg. Individual PCB 1kg
• Component Height: : Top Max. 70 mm : Bottom components within 25mm radius of routing, Max. 12 mm : Outside of 25mm radius of routing, Max. 30 mm

GAR1200

• Size: 350 × 310 mm (Dual Table), 480 × 310 mm (Single Large Table)
• Thickness: 0.5mm – 8.0mm
• Component Height: Top max. 12 mm (option: max. 17 mm) Bottom max. 25 mm (option: max. 42 mm)
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y&W axes)
• Accuracy: : ±0.1 mm
• Cutting Speed: 100mm/sec max
• Size: 1.75M x 1.45M x 1.70M
• Additional : Also available as a single worktable for larger PCBS.

MPR

• Size: 450 × 400 mm (Vacuum P&P) 315 × 230 mm (Multi-gripper P&P)
• Thickness: 0.5mm – 8.0mm
• Component height: Top max. 17 mm, Bottom max. 40 mm
• Non-routing speed: 1500mm/sec
• Accuracy or Repeatability: ±0.1 mm
• Cutting speed: 100mm/sec max
• Size: (W x D x H) = 1740 mm x 2100 mm x 1750 mm

GBR MAX

• Non-Routing Speed: 800 mm/sec
• Routing Speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Configuration: 9 axis
• Manipulator Motors: AC brushless servo motors
• Manipulator Repeatability: ±0.02 mm
• Resolution: ±0.01 mm
• Design: Fixtureless - Bottom Routing
• Panel Positioning: Conveyor rail clamping (Top and Side) and Board gripping
• Panel Width: Min. 70mm, Max. 400mm,
• Panel Length: Max. 1200mm
• Panel Thickness: 0.8 mm – 5.0 mm
• PCB Max. weight: 6.0 Kg
• Component Height: Top max. 70 mm, Bottom max. 17 mm, For bottom comp. height up to 30 mm, ask Getech sales

IRLD

• Configuration: 4 axes
• Manipulator Motors: AC brushless servo motors
• Manipulator Repeatability: ±0.02 mm
• Resolution: ±0.01 mm
• Design: Dual workstation with dedicated fixtures on a rotary turntable
• Panel Positioning: Locating pins with top clamp
• Panel Size: 300mm X 300mm
• Panel Thickness: 0.6mm – 1.0mm
• Component Height: Top max. 5mm, Bottom max. 5mm
• Type: 40 W Nanosecond Green Laser
• Cooling: Closed-loop water chiller
• Cutting Window: Up to 100 mm × 100 mm

SPR1200

• Assets: High Speed Routing & Throughput, Dual Tables, In-Line Automation Ready, High Accuracy Quality Cut
• Assets: High Resolution Camera, Automatic Tool Change, Safety Protection, Powerful Vacuum System, User-Friendly Software
• Space saving length: 1137 mm
• Accuracy or Repeatability: ±0.1 mm

IDM

• Size: 300mm x 200mm
• Thickness: 0.5mm – 2.0mm
• Component Height: 12mm [Subject to review by Getech Engineering.]
• Non-dicing speed: 1000mm/sec
• Accuracy: +/- 0.1mm
• Cutting Speed: 200mm/sec max
• Saw thickness: 0.3mm – 1.0mm
• Size: 1.25M x 1.5M x 1.75M

GSNL

• Design: SCARA (4 axis robot)
• Repeatability: +/- 0.01 mm
• Reach: 650 Horizontal, 180 mm Vertical
• End Effector: Dual gripper type pick up heads, Product-specific
• Transport Positions: Output placing, Tray loading and unloading
• Axis & Drive Method: Axis X – Linear module driven by a servo motor Axis Y – Belt-drive transportation by induction motor
• Tray Positioning: Tray Lifter with guides
• Machine Size (WxDxH): 1342 mm x 1932 mm x 2230 mm
• Power Supply: Options available

GSR1200

• Size: 350 × 350 mm, 350 × 276 mm (with Auto-Tool Change)
• Thickness: 0.4 mm – 3.0 mm (Option: 0.4 mm – 8.0 mm with 0.5 kW Spindle)
• Component Height: Top max. 17 mm, Bottom max. 50 mm (option: max. 25 mm)
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y&W axes)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Cutting speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Dimensions: 1,300 mm x 1,300 mm x 1,700 mm
• Additional : It is available in many configurations, offering twin and single table sizes, vacuum fixtures and dual head spindles.

GSR1280

• Size: 520 mm x 520 mm, 520 × 446 mm (with Auto-Tool Change)
• Thickness: 0.4mm – 8.0mm
• Component Height: Top max. 17 mm, Bottom max. 50 mm (option: max. 25 mm)
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y&W axes)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Cutting speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Dimensions: 1620 W x 1570 D x 1700 H mm
• Additional: It is available in many configurations, offering twin and single table sizes, vacuum fixtures and dual head spindles

GSR1290

• Size: 950 × 630 mm 950 × 560 mm (with Auto-Tool Change)
• Thickness: 0.4 mm – 8.0 mm
• Component Height: Top max. 17 mm, Bottom max. 50 mm
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y-axis)
• Accuracy or Repeatability : ±0.1 mm
• Cutting speed: 100mm/sec max
• Dimensions: (W x D x H) = 1620 mm x 1745 mm x 1700 mm
• Additional: It is available in many configurations, offering twin and single table sizes, vacuum fixtures and dual head spindles

GSR1200E

• Size: 520 × 380 mm, 520 × 306 mm (with Auto-Tool Change), 520 × 450 mm (without Top Clamp)
• Thickness: 0.4 mm – 3.0 mm (Option: 0.4 mm – 8.0 mm with 0.5 kW Spindle)
• Component height: Top max. 17 mm, Bottom max. 50 mm
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y-axis)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Cutting speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Dimensions: 1,300mm x 1,300mm x 1,700mm
• Vacuum Tank Size (Ø x H): 400 mm x 800 mm
• Weight (Main + Tank): Approx. 700 kg + 25 kg

GSR1280E

• Size: 630 × 620 mm 630 × 550 mm (with Auto-Tool Change)
• Thickness: 0.4 mm – 8.0 mm
• Component Height: Top max. 17 mm, Bottom max. 50 mm
• Non-routing speed: 1250 mm/sec max (X-axis), 1000 mm/sec max (Y-axis)
• Accuracy or Repeatability : ±0.1 mm straight lines, curves and interpolated profiles
• Cutting speed: 100 mm/sec max (depending on material, cutting quality & tool diameter)
• Dimensions: 1,300mm x 1,745mm x 1,700mm
• Additional: It is available in many configurations, offering twin and single table sizes, vacuum fixtures and dual head spindles

GSR2280

• Size : 550 × 560 mm, 550 × 515 mm (with Auto-Tool Change)
• Thickness: 0.4 mm – 8.0 mm
• Component Height: Top max. 17 mm, Bottom max. 50 mm
• Accuracy or Repeatability: ±0.1 mm
• Dimensions: 1620 W x 1670 D x 1700 H mm

GSS1200

• Size: 300mm x 300mm
• Thickness: 0.5mm – 2.0mm
• Component Height: 12mm [Subject to review by Getech Engineering.]
• Non-sawing speed: 1000mm/sec
• Accuracy: +/- 0.1mm
• Speed: 200mm/sec max
• Sawing angle: 0° to 360°
• Saw thickness: 0.3mm – 1.0mm
• Dimensions: 1.3M x 1.3M x 1.7M

GLSS

• Table Size: 350mm x 350mm
• Thickness: Up to 0.8 mm for FR4 (Design guidelines available)
• Accuracy: +/- 0.1mm
• Laser System: Short Pulse Nanosecond Laser
• Machine size (W x D x H): 1630mm x 1580mm x 1850mm
• Additional: Also able to handle multiple smaller designs

GSR

GLMS2000

• Size: 1200mm x 400mm
• Thickness: 0.8mm – 4.0mm
• Accuracy: +/- 0.1mm
• Laser System: 30W CO2 (Class 4)
• Size: 1.8M x 1.8M x 1.87M
• Additional: Also able to handle multiple smaller parts on single PCB

GLMS

• Size (double-side marking): 450mm x 400mm
• Size (single-side marking): 550mm x 570mm
• Thickness: 0.8mm – 4.0mm
• Accuracy: +/- 0.1mm
• Laser system: 30W CO2 (Class 4)
• Dimensions: 0.82M x 1.8M x 1.55M
• Additional: Also able to handle multiple smaller parts on single PCB

GLRH

• Size: 300mm x 300mm
• Component Height: Up to 50mm
• Scan Speed: Up to 12M/Sec
• Accuracy: +/- 0.1mm
• Laser system: 25W Fiber Laser (Class 4)
• Dimensions: 1.0M x 1.275M x 1.7M